MAX152CPP+ vs MAX152EPP Comparaison
Comparaison détaillée côte à côte de MAX152CPP+ par Analog Devices et MAX152EPP par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX152CPP+ | MAX152EPP |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | NRND |
| Converter Type | 8-bit flash analog-to-digital converter | — |
| Input Channels | 1 analog input | — |
| Résolution | 8 bits | 8 bit |
| Conversion Throughput | 400 kSPS | — |
| Conversion Time | 1.8 microseconds | 1.8 µs |
| Tension d'alimentation | Single supply up to +3.6 V | — |
| Full-Power Bandwidth | 300 kHz | — |
| Sample-and-Hold | Internal track-and-hold | — |
| External Reference Requirement | No external reference required | — |
| Operating Supply Current | 1.5 mA | 1.5 mA (operating mode) |
| Power-Down Supply Current | 1 microamp | — |
| Power-Up Time | 900 ns | 900 ns |
| Output Interface | 8-bit parallel | — |
| Boîtier | 20-pin PDIP, 0.300 inch (7.62 mm) | PDIP-20 (EPP) |
| Type de montage | Through-hole | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Analog Input Range | [DATA_NEEDED: analog input voltage range] | — |
| Input Accuracy | [DATA_NEEDED: input accuracy] | — |
| Output Logic Levels | [DATA_NEEDED: output logic voltage levels] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Architecture | — | Half-flash (semiflash) |
| Number of Channels | — | 1 |
| Throughput | — | 400 ksps |
| Input Bandwidth (Full Power) | — | 300 kHz |
| Supply Voltage (Single) | — | +2.7 V to +3.6 V |
| Supply Voltage (Dual) | — | ±3 V |
| Power-Down Current | — | 1 µA |
| Input Type | — | Single-ended, unipolar or bipolar |
| Data Interface | — | Parallel, µP-compatible |
| Internal Track/Hold | — | Yes |
| Température de fonctionnement | — | -40 °C to +85 °C (extended grade) |
| Statut RoHS | — | Non-compliant (PDIP-20 with Sn/Pb leads; check MAX152EPP+ RoHS variant separately) |