MAX164BCNG vs MAX128BCNG Comparaison
Comparaison détaillée côte à côte de MAX164BCNG par Analog Devices et MAX128BCNG par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX164BCNG | MAX128BCNG |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | NRND | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $13,25 | $10,27 |
| Résolution | 12 bit | 12 bit |
| Number of Channels | 1 | — |
| Conversion Rate | 100 ksps | — |
| Architecture | SAR (Successive Approximation) with Track-and-Hold | — |
| Analog Input Range | 0 V to +5 V unipolar; ±5 V bipolar with external resistors | — |
| Supply Voltage (Analog V+) | +5 V nominal | — |
| Supply Voltage (Digital VDD) | +5 V nominal | — |
| Reference | Internal 5.0 V buried-zener, ±1.5% initial accuracy | — |
| Data Interface | Parallel, microprocessor-compatible (8/16-bit bus) | — |
| Integral Nonlinearity (INL) | ±1/2 LSB (typ) | — |
| Power Dissipation | [DATA_NEEDED: full-load power dissipation in mW] | — |
| Courant d'arrêt | less than 100 µA (hardware PD pin) | — |
| Température de fonctionnement | 0 °C to +70 °C (C grade, commercial) | — |
| Boîtier | PDIP-24 (through-hole, 0.300 inch row spacing) | 24-pin PDIP |
| Type de montage | Through-Hole | Through-Hole |
| Temperature Grade | COMMERCIAL | — |
| Terminal Form | THROUGH-HOLE | — |
| Lead Finish / RoHS | SnPb or Pb-free variant available; see ordering info | — |
| Number of Analog Input Channels | — | 8 |
| Fréquence d'échantillonnage | — | 8 ksps |
| Tension d'alimentation | — | +5 V (single supply) |
| Plage de tension d'entrée | — | Software-selectable: 0 to VREF, 0 to VREF/2, ±VREF, ±VREF/2 |
| Internal Reference Voltage | — | 4.096 V |
| External Reference Support | — | Yes |
| Linearity (DNL/INL) | — | ±1/2 LSB |
| Track/Hold Bandwidth | — | 5 MHz |
| Fault-Protected Analog Inputs | — | ±16.5 V tolerant |
| Serial Interface | — | 2-wire I2C-compatible (SDA, SCL) |
| ADC Architecture | — | SAR (Successive Approximation) |
| Plage de température de fonctionnement | — | 0C to +70C (C grade) |
| Statut RoHS | — | Compliant (lead-free + suffix variants) |