MAX176AEPA+ vs MAX145AEPA Comparaison
Comparaison détaillée côte à côte de MAX176AEPA+ par Maxim Integrated et MAX145AEPA par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX176AEPA+ - 12-Bit 250ksps Serial ADC with T/H | Maxim Integrated
MAX176AEPA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX176AEPA+ | MAX145AEPA |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,65 | $5,20 |
| Résolution | 12 bits | 12 bits |
| Fréquence d'échantillonnage | 250 ksps | — |
| Conversion Architecture | Successive Approximation (SAR) | Successive-approximation (SAR) |
| Number of Channels | 1 | 2 |
| Input Type | Single-Ended (unipolar or bipolar with scaling) | True differential (MAX145) / single-ended selectable (MAX144) |
| Analog Supply Voltage | +5 V (typ), VSS = -12 V or -15 V | — |
| Analog Input Range | 0 V to +5 V (unipolar) or ±5 V (bipolar) | — |
| Integral Linearity Error | [DATA_NEEDED: INL max LSB] | — |
| Track-and-Hold Acquisition Time | 0.4 µs (max) | — |
| Conversion Time | 3.5 µs (typ) | 7.4 us (typical) |
| Output Interface | Serial (SPI / QSPI / MICROWIRE compatible) | — |
| Internal Reference | Buried-zener, on-chip | +2.5 V |
| Plage de température de fonctionnement | -40 °C to +85 °C (industrial) | -40 C to +85 C (E suffix = industrial) |
| Boîtier | 8-pin PDIP (through-hole, plastic DIP-8) | — |
| Type de montage | Through-Hole | Through-Hole (THT) |
| Power Dissipation | [DATA_NEEDED: typical P_D in mW] | — |
| Statut RoHS | Compliant | Non-RoHS (pre-2011 vintage product; + variant is RoHS) |
| Lead-Free | Yes | — |
| Part Number | — | MAX145AEPA |
| Manufacturer | — | Analog Devices (formerly Maxim Integrated) |
| Fonction | — | 12-bit 2-channel SAR analog-to-digital converter (ADC) |
| Sampling Rate (Throughput) | — | 108 ksps |
| Wake-Up Time | — | 2.5 us |
| Supply Voltage (VDD) | — | +2.7 V to +5.25 V (single supply) |
| Active Power Consumption | — | 3.2 mW at VDD = +3.6 V |
| Courant d'arrêt | — | < 10 uA (auto power-down) |
| Integral Nonlinearity (INL) | — | ±1 LSB (max) |
| Differential Nonlinearity (DNL) | — | ±0.5 LSB (max, no missing codes) |
| Digital Interface | — | 3-wire SPI / QSPI / MICROWIRE-compatible serial |
| Boîtier / Format | — | 8-pin PDIP (0.300 inch / 7.62 mm body) |