MAX202CSE+ vs MAX202IDE4 Comparaison

Comparaison détaillée côte à côte de MAX202CSE+ par Maxim Integrated et MAX202IDE4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX202CSE+ MAX202CSE+ - +5V RS-232 Transceiver | Maxim Integrated

MAX202CSE+ - +5V RS-232 Transceiver | Maxim Integrated

MAX202CSE+ ✓ Actif
Texas Instruments
MAX202IDE4 MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments

MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments

MAX202IDE4 ✓ Actif

Comparaison des spécifications

Paramètre MAX202CSE+ MAX202IDE4
Marque Maxim Integrated Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Dual RS-232 transceiver interface IC Dual RS-232 line driver/receiver
Tension d'alimentation +5 V 5 V
Number of Drivers 2 —
Number of Receivers 2 —
Maximum Data Rate In excess of 120 kbps 120 kbit/s
Driver Output Signal Level ±5 V EIA/TIA-232E —
External Charge-Pump Capacitors 0.1 µF —
Interface Standard EIA/TIA-232E —
Communication Protocol RS-232 / V.28 —
Boîtier 16-pin SOIC 16-pin SOIC
Type de montage Surface Mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Input Logic Levels [DATA_NEEDED: input logic thresholds] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of Driver Channels — 2 channels
Number of Receiver Channels — 2 channels
ESD Protection on Bus Pins — ±15 kV
ESD Test Model — Human-body model
Charge-Pump Capacitor — 0.1 µF external capacitor
RS-232 Standard Compliance — TIA/EIA-232-F and ITU V.28
Transceiver Configuration — 2/2 full-duplex RS-232 channels
Driver Output Levels — [DATA_NEEDED: RS-232 output voltage levels]
Receiver Input Levels — [DATA_NEEDED: receiver input voltage thresholds]
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis