MAX202ECSE+TG068 vs MAX202ESE+ Comparaison

Comparaison détaillée côte à côte de MAX202ECSE+TG068 par Analog Devices et MAX202ESE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ Actif
Analog Devices
MAX202ESE+ MAX202ESE+ - Dual +5V RS-232 Transceiver | Analog Devices

MAX202ESE+ - Dual +5V RS-232 Transceiver | Analog Devices

MAX202ESE+ ✓ Actif

Comparaison des spécifications

Paramètre MAX202ECSE+TG068 MAX202ESE+
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Number of Drivers 2 —
Number of Receivers 2 2
Transceiver Configuration 2/2 full RS-232 —
Supported Protocol RS-232 —
Supply Voltage Range 4.5 V to 5.5 V —
ESD Protection 15 kV [DATA_NEEDED: ESD protection rating]
Boîtier 16-SOIC, 0.154 in x 3.90 mm width 16-pin narrow SOIC
Packaging Tape and reel —
Type de montage Surface mount Surface mount
Nombre de broches 16 —
Driver Output Count 2 —
Receiver Input Count 2 —
Communication Mode Full duplex —
Operating Voltage 4.5 V to 5.5 V —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Débit de données [DATA_NEEDED: maximum data rate] In excess of 120 kbps
Output High and Low Levels [DATA_NEEDED: RS-232 output voltage levels] —
Input Hysteresis [DATA_NEEDED: receiver input hysteresis] —
Courant d'alimentation [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Product Type — Dual RS-232 transceiver
Number of Transmitters — 2
Tension d'alimentation — +5 V
RS-232 Output Level — ±5 V EIA/TIA-232E
Charge Pump — Integrated
External Charge-Pump Capacitor — 0.1 µF
Duplex Configuration — Full duplex
Operating Temperature Grade — Industrial temperature
Automotive Qualification — Not applicable

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis