MAX202ESE-TG068 vs MAX202ECSE+TG068 Comparaison

Comparaison détaillée côte à côte de MAX202ESE-TG068 par Analog Devices et MAX202ECSE+TG068 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX202ESE-TG068 MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices

MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices

MAX202ESE-TG068 ✓ Actif
Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ Actif

Comparaison des spécifications

Paramètre MAX202ESE-TG068 MAX202ECSE+TG068
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type RS-232 transceiver —
Channel Configuration 2 driver / 2 receiver —
Tension d'alimentation 5 V —
Débit de données In excess of 120 kbps [DATA_NEEDED: maximum data rate]
RS-232 Output Signal Levels Plus or minus 5 V —
Interface Standard EIA/TIA-232E —
External Charge-Pump Capacitor 0.1 uF —
Boîtier 16-pin SOIC 16-SOIC, 0.154 in x 3.90 mm width
Type de montage Surface mount Surface mount
Transceiver Type Full-duplex —
Logic Compatibility [DATA_NEEDED: logic compatibility] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: typical and maximum supply current]
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Driver Output Resistance [DATA_NEEDED: driver output resistance] —
Statut RoHS RoHS [DATA_NEEDED: RoHS status]
Number of Drivers — 2
Number of Receivers — 2
Transceiver Configuration — 2/2 full RS-232
Supported Protocol — RS-232
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — 15 kV
Packaging — Tape and reel
Nombre de broches — 16
Driver Output Count — 2
Receiver Input Count — 2
Communication Mode — Full duplex
Operating Voltage — 4.5 V to 5.5 V
Output High and Low Levels — [DATA_NEEDED: RS-232 output voltage levels]
Input Hysteresis — [DATA_NEEDED: receiver input hysteresis]
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis