MAX202IDE4 vs MAX202CSE+ Comparaison

Comparaison détaillée côte à côte de MAX202IDE4 par Texas Instruments et MAX202CSE+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MAX202IDE4 MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments

MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments

MAX202IDE4 ✓ Actif
Maxim Integrated
MAX202CSE+ MAX202CSE+ - +5V RS-232 Transceiver | Maxim Integrated

MAX202CSE+ - +5V RS-232 Transceiver | Maxim Integrated

MAX202CSE+ ✓ Actif

Comparaison des spécifications

Paramètre MAX202IDE4 MAX202CSE+
Marque Texas Instruments Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Dual RS-232 line driver/receiver Dual RS-232 transceiver interface IC
Number of Driver Channels 2 channels —
Number of Receiver Channels 2 channels —
Tension d'alimentation 5 V +5 V
Maximum Data Rate 120 kbit/s In excess of 120 kbps
ESD Protection on Bus Pins ±15 kV —
ESD Test Model Human-body model —
Charge-Pump Capacitor 0.1 µF external capacitor —
RS-232 Standard Compliance TIA/EIA-232-F and ITU V.28 —
Plage de température de fonctionnement -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Boîtier 16-pin SOIC 16-pin SOIC
Type de montage Surface mount Surface Mount
Transceiver Configuration 2/2 full-duplex RS-232 channels —
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Driver Output Levels [DATA_NEEDED: RS-232 output voltage levels] —
Receiver Input Levels [DATA_NEEDED: receiver input voltage thresholds] —
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Number of Drivers — 2
Number of Receivers — 2
Driver Output Signal Level — ±5 V EIA/TIA-232E
External Charge-Pump Capacitors — 0.1 µF
Interface Standard — EIA/TIA-232E
Communication Protocol — RS-232 / V.28
Input Logic Levels — [DATA_NEEDED: input logic thresholds]
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis