MAX20313EWC+T vs MAX20313EWC+ Comparaison
Comparaison détaillée côte à côte de MAX20313EWC+T par Analog Devices et MAX20313EWC+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX20313EWC+T - 6A Adjustable Current-Limit Switch | Analog Devices
MAX20313EWC+T ✓ ActifAnalog Devices
MAX20313-MAX20316 - 6A Adjustable Current-Limit Switch WLP-12 | Analog Devices
MAX20313EWC+ ✓ ActifComparaison des spécifications
| Paramètre | MAX20313EWC+T | MAX20313EWC+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,46 | $1,71 |
| Fonction | Adjustable current-limit load switch (e-fuse) | Programmable current-limit switch (high-side load switch) |
| Plage de tension d'entrée | 2.5 V to 5.5 V | — |
| Continuous Load Current | Up to 6 A | — |
| Adjustable Current Limit Range | 500 mA to 6 A | — |
| On-Resistance (typ) | 10 mΩ | — |
| On-Resistance (max) | [DATA_NEEDED: RON max] | — |
| Quiescent Supply Current | 250 µA (operating) | — |
| Quiescent Current (Disabled) | [DATA_NEEDED: IQ_OFF] | — |
| Fault Response (MAX20313) | Continuous current-limit (auto-retry) | — |
| Reverse-Current Blocking | Yes | — |
| Arrêt thermique | Yes | Yes (internal) |
| ON Control Input | Active-high | — |
| FLAG Output | Yes (open-drain fault indicator) | Open-drain fault indicator |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40°C to +85°C (extended industrial) |
| Boîtier | 12-bump WLP, 1.65 mm x 1.45 mm | 12-bump WLP (1.65 mm × 1.45 mm) |
| Type de montage | Surface Mount (WLP) | Surface Mount (WLP) |
| ESD Rating (HBM) | [DATA_NEEDED: ESD HBM] | — |
| Statut RoHS | Compliant | — |
| Input Voltage Range (IN) | — | +2.5 V to +5.5 V |
| Adjustable Current Limit | — | 500 mA to 6 A |
| On-Resistance (RON) | — | 10 mΩ typical |
| Reverse Current Blocking | — | Yes |
| Fault Response - MAX20313/MAX20315 | — | Continuous current-limit mode (auto-retry) |
| Fault Response - MAX20314/MAX20316 | — | Latch-off mode |
| Blanking Time | — | Fixed (per datasheet) |
| Enable Input | — | Active-high EN |
| Compliance | — | RoHS compliant |