MAX211IDWR vs ADM208ARZ Comparaison
Comparaison détaillée côte à côte de MAX211IDWR par Texas Instruments et ADM208ARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX211IDWR - 5V 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211IDWR ⚠ Dernier achatComparaison des spécifications
| Paramètre | MAX211IDWR | ADM208ARZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Dernier achat | Actif |
| Tension d'alimentation | 5 V | — |
| Maximum Data Rate | 120 kbit/s | 200 kB/s |
| Line Drivers | 4 | — |
| Line Receivers | 5 | — |
| ESD Protection | ±15 kV | — |
| Driver Output Swing | ±9 V | Approximately ±9 V |
| Boîtier | 28-pin SOIC | 24-pin SOIC |
| Plage de température de fonctionnement | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Type de montage | Surface mount | — |
| Interface Standard | RS-232 | EIA-232-E and V.28 |
| Compliance Standard | TIA/EIA-232-F and ITU V.28 | — |
| ESD Test Model | Human Body Model | — |
| ESD Protected Pins | Serial-port connection pins, including GND | — |
| Charge-Pump Topology | Dual charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 capacitors | — |
| Shutdown Supply Current | Low; numerical value not provided | — |
| Statut RoHS | RoHS3 | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | RS-232 transceiver |
| Number of Drivers | — | 4 |
| Number of Receivers | — | 4 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Power Consumption | — | 15 mW |
| Charge-Pump Capacitor Range | — | 0.1 µF to 10 µF |
| Receiver Input Voltage Tolerance | — | ±30 V |
| Package Width | — | 7.50 mm |
| Packaging | — | Tube |
| Lead-Free Status | — | Lead-free |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Shutdown Function | — | [DATA_NEEDED: shutdown function] |