MAX22028AWA+ vs MAX14882AWE+ Comparaison
Comparaison détaillée côte à côte de MAX22028AWA+ par Analog Devices et MAX14882AWE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX22028AWA+ - 3.5kVRMS Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX22028AWA+ ✓ ActifAnalog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ ActifComparaison des spécifications
| Paramètre | MAX22028AWA+ | MAX14882AWE+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | USB Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,45 | $6,18 |
| Fonction | Isolated half-duplex RS-485/RS-422 transceiver | Isolated High-Speed CAN Transceiver |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | RS-422, RS-485 | ISO 11898-2 CAN |
| Duplex | Half duplex | — |
| Data Rate (max) | 16 Mbps | — |
| Galvanic Isolation Voltage | 3.5 kVRMS (60 s, per datasheet) | 5000 VRMS (60s) |
| Supply Voltage (UART side) | 3.0 V to 3.6 V | — |
| Bus Fault Tolerance | [DATA_NEEDED: exact +/- V rating] | — |
| Creepage Distance | 5.5 mm (wide-body SOIC) | — |
| Température de fonctionnement | -40C to +85C | — |
| Boîtier | 8-SOIC, wide body (5.5 mm creepage) | 16-pin Wide SOIC (W SOIC) |
| Type de montage | Surface Mount | — |
| AutoDirection Control | Yes (internal, no DE/RE pin required) | — |
| Hot-Swap Support | Yes (cable side) | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Débit de données | — | up to 1 Mbps |
| VDDA Supply Voltage (Controller-side) | — | 3.0 V to 5.5 V |
| VDDB Supply Voltage (Bus-side) | — | 4.5 V to 5.5 V |
| Receiver Common-Mode Range | — | -25 V to +25 V |
| CANH/CANL Fault Tolerance | — | ±54 V |
| ESD Protection (Bus-side, HBM) | — | ±15 kV |
| Integrated Transformer Driver | — | Yes |
| Auxiliary LDO Output Current | — | 130 mA internal / 300 mA max |
| Plage de température de fonctionnement | — | -40 °C to +125 °C |
| Creepage and Clearance | — | 8 mm |