MAX22028AWA+ vs MAX22025AWA+ Comparaison
Comparaison détaillée côte à côte de MAX22028AWA+ par Analog Devices et MAX22025AWA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX22028AWA+ - 3.5kVRMS Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX22028AWA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX22028AWA+ | MAX22025AWA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,45 | $3,10 |
| Fonction | Isolated half-duplex RS-485/RS-422 transceiver | Transceiver, Isolated RS-485/RS-422 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | RS-422, RS-485 | — |
| Duplex | Half duplex | Half |
| Data Rate (max) | 16 Mbps | 500 kbps |
| Galvanic Isolation Voltage | 3.5 kVRMS (60 s, per datasheet) | — |
| Supply Voltage (UART side) | 3.0 V to 3.6 V | — |
| Bus Fault Tolerance | [DATA_NEEDED: exact +/- V rating] | — |
| Creepage Distance | 5.5 mm (wide-body SOIC) | — |
| Température de fonctionnement | -40C to +85C | -40°C to +85°C |
| Boîtier | 8-SOIC, wide body (5.5 mm creepage) | 8-pin Wide-Body SOIC |
| Type de montage | Surface Mount | Surface Mount |
| AutoDirection Control | Yes (internal, no DE/RE pin required) | — |
| Hot-Swap Support | Yes (cable side) | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Isolation Voltage | — | 3.5 kVRMS |
| UART-Side Supply Voltage | — | 3.0 V to 5.5 V |
| Creepage | — | 5.5 mm |
| ESD Protection (HBM, bus pins) | — | ±35 kV |
| Receiver Input Impedance | — | 1/8 unit load |
| Drivers per Bus | — | Up to 256 |
| Receiver Hysteresis (typ) | — | 30 mV |
| Short-Circuit Protection | — | Yes |
| Arrêt thermique | — | Yes |