MAX232ACPE+ vs MAX232EPE Comparaison
Comparaison détaillée côte à côte de MAX232ACPE+ par Maxim Integrated et MAX232EPE par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE ✓ ActifComparaison des spécifications
| Paramètre | MAX232ACPE+ | MAX232EPE |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | RS-232 transceiver | RS-232 Transceiver (Driver/Receiver) |
| Driver Channels | 2 | — |
| Receiver Channels | 2 | — |
| Tension d'alimentation | +5 V | 4.5 V to 5.5 V (single +5V supply) |
| Interface Standards | EIA/TIA-232E and V.28/V.24 | — |
| Boîtier | 16-pin PDIP | 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) |
| Type de montage | Through-hole | Through-Hole |
| Manufacturer | Maxim Integrated | — |
| Product Description | +5 V-powered multichannel RS-232 drivers/receivers | — |
| Driver/Receiver Count | 2/2 | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (extended industrial) |
| Débit de données | [DATA_NEEDED: maximum data rate] | 120 kbps (typical) |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Charge-Pump Capacitors | [DATA_NEEDED: recommended external capacitor values] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV HBM on RS-232 pins (per Maxim datasheet family) |
| Statut RoHS | unknown | Compliant (lead-free + indicates lead-free finish) |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Pinout | [DATA_NEEDED: complete numbered pinout] | — |
| Drivers / Receivers | — | 2 / 2 |
| RS-232 Output Voltage | — | ±10 V (typical, generated internally by charge pump) |
| External Charge-Pump Capacitors | — | 4 x 1 uF (typical, tantalum or ceramic) |
| Receiver Input Levels | — | ±30 V tolerant |
| Standards Compliance | — | EIA/TIA-232E, V.28, V.24 |
| Niveau MSL | — | 1 (unlimited) |
| Nombre de broches | — | 16 |