MAX232BASE+ vs MAX3232ECDR Comparaison
Comparaison détaillée côte à côte de MAX232BASE+ par Analog Devices et MAX3232ECDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232ECDR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3232ECDR ✓ ActifComparaison des spécifications
| Paramètre | MAX232BASE+ | MAX3232ECDR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 driver and receiver | Dual RS-232 line driver and receiver |
| Driver Count | 2 drivers | — |
| Receiver Count | 2 receivers | — |
| Number of Transceivers | 2/2 transceiver | — |
| Tension d'alimentation | +5 V | — |
| Receiver Input Tolerance | ±30 V | — |
| Receiver Logic Threshold | 1.3 V typical | — |
| Receiver Hysteresis | 0.5 V typical | — |
| Output Logic Level | 5 V TTL/CMOS | — |
| Interface Standard | TIA/EIA-232-F | RS-232 |
| Boîtier | 16-pin SOIC, 0.154 in (3.90 mm) width | 16-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Voltage Generator | On-chip capacitive voltage generator | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | ±15 kV IEC ESD protection |
| Transceiver Configuration | — | 2 transmit and 2 receive functions |
| Supply Topology | — | Single 3 V to 5.5 V supply |
| ESD Test Method | — | IEC 61000-4-2 contact and air-gap discharge |
| TIA/EIA Compliance | — | Meets or exceeds TIA/EIA-232-F requirements |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Standard Packaging | — | [DATA_NEEDED: tape-and-reel standard quantity] |