MAX232CASE+T vs MAX232ACSE+T Comparaison
Comparaison détaillée côte à côte de MAX232CASE+T par Analog Devices et MAX232ACSE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated
MAX232ACSE+T ✓ ActifComparaison des spécifications
| Paramètre | MAX232CASE+T | MAX232ACSE+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 transceiver | — |
| Tension d'alimentation | +5 V | 4.5 V to 5.5 V |
| Number of Transmitters | 2 | — |
| Number of Receivers | 2 | 2 |
| Interface Standard | RS-232 / EIA-TIA-232E / V.28 / V.24 | — |
| Logic Compatibility | TTL / CMOS | — |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Boîtier | 16-SOIC | 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width) |
| Nombre de broches | 16 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Automotive Qualification | Not specified | — |
| Statut RoHS | Unknown | Compliant |
| REACH Status | Unknown | — |
| Lead-Free Status | Unknown | — |
| Halogen-Free Status | Unknown | — |
| Charge-Pump Capacitors | External capacitors required | — |
| Output Polarity | Bipolar RS-232 | — |
| Data Direction | 2 transmit and 2 receive channels | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input Logic High Voltage | [DATA_NEEDED: input logic-high threshold] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Fonction | — | RS-232 Transceiver (2 Driver / 2 Receiver) |
| Débit de données | — | 200 kbps |
| Number of Drivers | — | 2 |
| Duplex | — | Full |
| Receiver Input Voltage Range | — | ±30 V (HBM ESD tolerance on RS-232 inputs) |
| Température de fonctionnement | — | 0 °C to +70 °C (C grade) |
| Charge Pump Capacitors | — | 4 x 0.1 µF external (typical) |
| Shutdown Mode | — | Yes (active-low, device-dependent) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Packaging | — | Tape & Reel (+T suffix) |