MAX232CEAWE+T vs MAX232CSE+T Comparaison

Comparaison détaillée côte à côte de MAX232CEAWE+T par Analog Devices et MAX232CSE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX232CEAWE+T MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

MAX232CEAWE+T ✓ Actif

Comparaison des spécifications

Paramètre MAX232CEAWE+T MAX232CSE+T
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 2/2 full RS-232 transceiver —
Transmitter Configuration 2 transmitters —
Receiver Configuration 2 receivers —
Interface Standard RS-232 —
Tension d'alimentation +5 V —
Plage de température de fonctionnement -40°C to +125°C 0 °C to +70 °C (commercial C-grade)
Boîtier 16-SOIC 16-pin Narrow SOIC (SOIC-N-16)
Nombre de broches 16 pins —
Type de montage Surface mount Surface Mount
Channel Direction Full duplex —
Driver and Receiver Count 2 drivers and 2 receivers —
Débit de données [DATA_NEEDED: maximum data rate] 120 kb/s
Input and Output Logic Levels [DATA_NEEDED: logic-level thresholds] —
RS-232 Output Voltage [DATA_NEEDED: driver output voltage] —
Charge-Pump Capacitors [DATA_NEEDED: recommended external capacitor values] —
Supply Decoupling [DATA_NEEDED: recommended bypass capacitor value] —
Statut RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification unknown —
Fonction — RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers — 2
Number of Receivers — 2
Protocol — RS-232 (EIA/TIA-232E, V.28/V.24)
Supply Voltage (Vcc) — 4.5 V to 5.5 V (single +5V supply)
RS-232 Driver Output Voltage — ±7.5 V minimum (typical ±9 V) into 3 kΩ load
Receiver Input Voltage Range — ±30 V
Charge Pump — Internal; requires 4 × 1 µF external capacitors
Niveau MSL — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free / RoHS — Yes (compliant per +T suffix)
Receiver Input Hysteresis — [DATA_NEEDED: receiver hysteresis voltage]
Supply Current (No Load) — [DATA_NEEDED: typical Icc]
Packaging — Tape & Reel (T+R)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis