MAX232CPE.C70062 vs MAX232EPE Comparaison
Comparaison détaillée côte à côte de MAX232CPE.C70062 par Analog Devices et MAX232EPE par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE ✓ ActifComparaison des spécifications
| Paramètre | MAX232CPE.C70062 | MAX232EPE |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 transceiver | RS-232 Transceiver (Driver/Receiver) |
| Tension d'alimentation | 5 V | 4.5 V to 5.5 V (single +5V supply) |
| Driver Channels | 2 channels | — |
| Receiver Channels | 2 channels | — |
| Interface Standard | EIA/TIA-232E, V.28, V.24 | — |
| Boîtier | 16-pin PDIP | 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) |
| Type de montage | Through-hole | Through-Hole |
| Nombre de broches | 16 pins | 16 |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Voltage Range | [DATA_NEEDED: receiver input voltage range] | — |
| Input Supply Current | [DATA_NEEDED: input supply current] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV HBM on RS-232 pins (per Maxim datasheet family) |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (lead-free + indicates lead-free finish) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Drivers / Receivers | — | 2 / 2 |
| Débit de données | — | 120 kbps (typical) |
| RS-232 Output Voltage | — | ±10 V (typical, generated internally by charge pump) |
| Température de fonctionnement | — | -40 C to +85 C (extended industrial) |
| External Charge-Pump Capacitors | — | 4 x 1 uF (typical, tantalum or ceramic) |
| Receiver Input Levels | — | ±30 V tolerant |
| Standards Compliance | — | EIA/TIA-232E, V.28, V.24 |
| Niveau MSL | — | 1 (unlimited) |