MAX232ECDR vs MAX232ACSE+ Comparaison

Comparaison détaillée côte à côte de MAX232ECDR par Texas Instruments et MAX232ACSE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MAX232ECDR MAX232ECDR - Dual RS-232 Driver/Receiver, ESD-Protected | TI

MAX232ECDR - Dual RS-232 Driver/Receiver, ESD-Protected | TI

MAX232ECDR ✓ Actif
Analog Devices
MAX232ACSE+ MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

MAX232ACSE+ ✓ Actif

Comparaison des spécifications

Paramètre MAX232ECDR MAX232ACSE+
Marque Texas Instruments Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Fonction Dual RS-232 Driver/Receiver —
Number of Drivers 2 —
Number of Receivers 2 2 receivers
Débit de données 120 kbit/s —
Supply Voltage (VCC) 4.5 V to 5.5 V —
Courant d'alimentation 8 mA (typ) [DATA_NEEDED: supply current]
Receiver Input Voltage Range ±30 V —
RS-232 Output Voltage Swing ±5 V min, ±10 V typ (from charge pump) —
ESD Protection (HBM) ±15 kV (per datasheet) —
ESD Protection (IEC 61000-4-2) Contact ±8 kV, Air ±15 kV —
Charge-Pump Capacitors 4 x 1.0 µF external [DATA_NEEDED: recommended charge-pump capacitor values]
Plage de température de fonctionnement 0 °C to 70 °C (commercial) [DATA_NEEDED: operating temperature range]
Boîtier 16-pin SOIC (D) 16-pin SOIC, 3.9 mm nominal body width
Type de montage Surface Mount Surface mount
Statut RoHS Compliant unknown
Standards Compliance TIA/EIA-232-F, ITU-T V.28 —
Product Type — RS-232 line driver and receiver transceiver
Tension d'alimentation — +5 V
Number of Transmitters — 2 transmitters
Interface Standard — EIA/TIA-232E and V.28/V.24
Data Direction — 2/2 transceiver configuration
Output Driver Type — RS-232 line driver
Receiver Type — RS-232 line receiver
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — unknown
AEC-Q100 Qualification — not_applicable
Lead-Free Status — unknown
Halogen-Free Status — unknown

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis