MAX232ECDWR vs MAX232EEWE+T Comparaison

Comparaison détaillée côte à côte de MAX232ECDWR par Texas Instruments et MAX232EEWE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX232EEWE+T MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEWE+T ✓ Actif

Comparaison des spécifications

Paramètre MAX232ECDWR MAX232EEWE+T
Marque Texas Instruments Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Dual RS-232 driver/receiver RS-232 transceiver (2 drivers and 2 receivers)
Number of Transmitters 2 —
Number of Receivers 2 —
Maximum Data Rate 250 kbps 120 kbps
Supply Voltage Range 4.5 V to 5.5 V —
Supply Type Single 5 V supply —
ESD Protection Standard IEC 61000-4-2 —
Boîtier 16-pin SOIC (DW), 0.295 inch / 7.50 mm width 16-pin wide SOIC, 7.50 mm width
Type de montage Surface mount Surface-mount SMD
Transmitter Output Type RS-232 line driver —
Receiver Output Type TTL/CMOS logic-level receiver —
Charge-Pump Architecture Capacitive voltage generator with external capacitors —
Number of External Charge-Pump Capacitors 4 —
Bypass Capacitor Connection 1 external capacitor pin —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Input Logic Levels [DATA_NEEDED: receiver input logic thresholds] —
RS-232 Common-Mode Voltage Range [DATA_NEEDED: RS-232 common-mode voltage range] —
Driver Output Current [DATA_NEEDED: driver output current] —
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
Driver Count — 2 channels
Receiver Count — 2 channels
Duplex Mode — Full duplex
Tension d'alimentation — 5 V
ESD Protection — ±15 kV HBM
RS-232 Compliance — EIA/TIA-232E
V.28 Compliance — CCITT V.28
Voltage Generation — On-chip charge-pump circuitry
Nombre de broches — 16 pins
Shipping Format — Tape and reel
Operating Voltage — [DATA_NEEDED: operating voltage range]
Courant d'alimentation — [DATA_NEEDED: supply current]
Receiver Hysteresis — [DATA_NEEDED: receiver hysteresis]
Statut RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis