MAX232ECWE+T vs MAX232ECDWR Comparaison
Comparaison détaillée côte à côte de MAX232ECWE+T par Analog Devices et MAX232ECDWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ ActifComparaison des spécifications
| Paramètre | MAX232ECWE+T | MAX232ECDWR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 transceiver | Dual RS-232 driver/receiver |
| Number of Drivers | 2 drivers | — |
| Number of Receivers | 2 receivers | 2 |
| Duplex Mode | Full duplex | — |
| Débit de données | 120kbps | — |
| Supply Voltage Range | 4.5V to 5.5V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | +5V | — |
| ESD Protection | ±15kV HBM | — |
| Interface Standard | CCITT V.28 | — |
| Boîtier | 16-pin SOIC | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width |
| Type de montage | Surface mount | Surface mount |
| Charge Pump | Integrated | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Transmitter Output Voltage | [DATA_NEEDED: RS-232 output voltage swing] | — |
| Receiver Input Threshold | [DATA_NEEDED: receiver input threshold] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Transmitters | — | 2 |
| Maximum Data Rate | — | 250 kbps |
| Supply Type | — | Single 5 V supply |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Transmitter Output Type | — | RS-232 line driver |
| Receiver Output Type | — | TTL/CMOS logic-level receiver |
| Charge-Pump Architecture | — | Capacitive voltage generator with external capacitors |
| Number of External Charge-Pump Capacitors | — | 4 |
| Bypass Capacitor Connection | — | 1 external capacitor pin |
| Input Logic Levels | — | [DATA_NEEDED: receiver input logic thresholds] |
| RS-232 Common-Mode Voltage Range | — | [DATA_NEEDED: RS-232 common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |