MAX232EEWE+T vs MAX232ECDWR Comparaison

Comparaison détaillée côte à côte de MAX232EEWE+T par Analog Devices et MAX232ECDWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX232EEWE+T MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

MAX232EEWE+T ✓ Actif

Comparaison des spécifications

Paramètre MAX232EEWE+T MAX232ECDWR
Marque Analog Devices Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-232 transceiver (2 drivers and 2 receivers) Dual RS-232 driver/receiver
Driver Count 2 channels —
Receiver Count 2 channels —
Duplex Mode Full duplex —
Tension d'alimentation 5 V —
Maximum Data Rate 120 kbps 250 kbps
ESD Protection ±15 kV HBM —
RS-232 Compliance EIA/TIA-232E —
V.28 Compliance CCITT V.28 —
Voltage Generation On-chip charge-pump circuitry —
Boîtier 16-pin wide SOIC, 7.50 mm width 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Nombre de broches 16 pins —
Type de montage Surface-mount SMD Surface mount
Shipping Format Tape and reel —
Operating Voltage [DATA_NEEDED: operating voltage range] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis] —
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Number of Transmitters — 2
Number of Receivers — 2
Supply Voltage Range — 4.5 V to 5.5 V
Supply Type — Single 5 V supply
ESD Protection Standard — IEC 61000-4-2
Transmitter Output Type — RS-232 line driver
Receiver Output Type — TTL/CMOS logic-level receiver
Charge-Pump Architecture — Capacitive voltage generator with external capacitors
Number of External Charge-Pump Capacitors — 4
Bypass Capacitor Connection — 1 external capacitor pin
Input Logic Levels — [DATA_NEEDED: receiver input logic thresholds]
RS-232 Common-Mode Voltage Range — [DATA_NEEDED: RS-232 common-mode voltage range]
Driver Output Current — [DATA_NEEDED: driver output current]
Quiescent Supply Current — [DATA_NEEDED: quiescent supply current]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis