MAX3095CSE+ vs MAX3095CEE+ Comparaison
Comparaison détaillée côte à côte de MAX3095CSE+ par Analog Devices et MAX3095CEE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3095CSE+ - 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095CSE+ ✓ ActifAnalog Devices
MAX3095CEE+ - ±15kV ESD, 10Mbps Quad RS-422/RS-485 Receiver | Analog Devices
MAX3095CEE+ ✓ ActifComparaison des spécifications
| Paramètre | MAX3095CSE+ | MAX3095CEE+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Receiver Channels | 4 channels | — |
| Supported Standards | RS-422 and RS-485 receiver operation | — |
| Maximum Data Rate | 10 Mbps | — |
| Tension d'alimentation | +5 V | 4.75 V to 5.25 V (5 V nominal) |
| Input ESD Protection, Human Body Model | ±15 kV | — |
| Input ESD Protection, Air-Gap Discharge | ±15 kV | — |
| Input ESD Protection, Contact Discharge | ±8 kV | — |
| Boîtier | 16-SOIC | 16-pin QSOP |
| Type de montage | Surface mount | Surface Mount |
| Product Type | Quad differential line receiver | — |
| ESD Protection Location | All receiver inputs | — |
| Application Category | RS-422/RS-485/RS-423 bus receiver | — |
| Level Translation | Receiver interface application | — |
| Telecommunications Suitability | Telecommunications equipment application listed by manufacturer | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Logic Levels | [DATA_NEEDED: output logic voltage levels] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | 13 mA typical (all channels active) |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Fonction | — | Receiver (0/4 driver/receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Receivers | — | 4 |
| Débit de données | — | 10 Mbps (minimum) |
| ESD Protection (Receiver Inputs) | — | ±15 kV HBM |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV typical |
| Input Hysteresis | — | 25 mV typical |
| Fail-Safe Bias | — | Yes (internal, forces logic-high on open/short inputs) |
| Température de fonctionnement | — | 0 °C to +70 °C (commercial C-grade) |
| Niveau MSL | — | 1 (unlimited) |
| Lead-Free | — | Yes |