MAX3221EEUE+T vs MAX3221MDBREP Comparaison

Comparaison détaillée côte à côte de MAX3221EEUE+T par Analog Devices et MAX3221MDBREP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX3221EEUE+T MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices

MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices

MAX3221EEUE+T ✓ Actif
Texas Instruments
MAX3221MDBREP MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments

MAX3221MDBREP - 250kbps RS-232 Transceiver | Texas Instruments

MAX3221MDBREP ✓ Actif

Comparaison des spécifications

Paramètre MAX3221EEUE+T MAX3221MDBREP
Marque Analog Devices Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Transceiver Type 1/1 full-duplex RS-232 transceiver —
Number of Drivers 1 driver 1
Number of Receivers 1 receiver 1
Supply Voltage Range 3.0 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
ESD Protection ±15 kV IEC ESD protection —
AutoShutdown Supply Current Approximately 1 µA —
Power Management Automatic shutdown and automatic wake-up —
Communication Standard EIA/TIA-232 and V.28/V.24 —
Boîtier 16-pin TSSOP 16-pin SSOP (DB)
Type de montage Surface mount —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -55 °C to 125 °C
Transmitter Output Voltage [DATA_NEEDED: transmitter output voltage] —
Receiver Input Threshold [DATA_NEEDED: receiver input threshold] —
Courant d'alimentation [DATA_NEEDED: operating supply current] —
External Capacitors [DATA_NEEDED: charge-pump capacitor requirements] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Single-channel RS-232 line driver/receiver transceiver
RS-232 Bus-Pin ESD Protection — ±15 kV using the human body model
Charge-Pump Configuration — Dual charge-pump circuit
Logic Input Compatibility — Accepts 5 V logic input with a 3.3 V supply
Automatic Power-Down — Automatically disables the driver for power savings
Protocol — RS-232
Interface Standard Compliance — TIA/EIA-232-F and ITU V.28
Package Width — 5.30 mm
Lead Pitch — 0.025 inch
Packaging — Cut Tape
Manufacturer — Texas Instruments

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis