MAX3232CDBR vs MAX3232ECDBR Comparaison
Comparaison détaillée côte à côte de MAX3232CDBR par Texas Instruments et MAX3232ECDBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232CDBR - 2/2 RS-232 Transceiver 3-5.5V | Texas Instruments (Tape & Reel)
MAX3232CDBR UnknownTexas Instruments
MAX3232ECDBR - RS-232 Transceiver 3-5.5V ±15kV ESD | TI (Tape & Reel)
MAX3232ECDBR ✓ ActifComparaison des spécifications
| Paramètre | MAX3232CDBR | MAX3232ECDBR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | RS-232 line driver/receiver transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Operating Data Rate | 250 kbit/s | — |
| Logic Input Compatibility | 5 V logic | — |
| Typical Supply Current | 300 uA | — |
| External Capacitor Value | 0.1 uF | — |
| ESD Protection | +/-15 kV terminal-to-terminal | — |
| Interface Standard | TIA/EIA-232-F and ITU V.28 | — |
| Boîtier | 16-SSOP, 5.30 mm width | 16-SSOP (DB, 0.209 in / 5.30 mm width) |
| Type de montage | Surface mount | Surface Mount |
| Technology | RS-232 CMOS interface | — |
| Température de fonctionnement | 0 C to +70 C | 0C to +70C |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Protocol | — | RS-232 |
| Type | — | Transceiver |
| Débit de données | — | 250 kbps (minimum) |
| ESD Protection (RS-232 Bus Pins) | — | ±15 kV (HBM) |
| ESD Protection (IEC 61000-4-2) | — | ±15 kV contact discharge / ±15 kV air-gap discharge |
| Standard Compliance | — | TIA/EIA-232-F |
| Packaging | — | Tube |
| External Capacitors Required | — | 4 x 0.1 uF (charge pump) |
| Lead Free Status | — | [DATA_NEEDED: lead free status] |