MAX3232CSE+T vs MAX232CSE+T Comparaison
Comparaison détaillée côte à côte de MAX3232CSE+T par Analog Devices et MAX232CSE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX3232CSE+T | MAX232CSE+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 transceiver | — |
| Transceiver Configuration | 2 transmit channels and 2 receive channels | — |
| Supply Voltage Range | 3.0V to 5.5V | — |
| Maximum Data Rate | 1Mbps | — |
| Interface Standard | True RS-232 | — |
| Boîtier | 16-pin SOIC | 16-pin Narrow SOIC (SOIC-N-16) |
| Type de montage | Surface mount | Surface Mount |
| External Charge-Pump Capacitors | 4 × 0.1µF | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Negative Supply Requirement | None | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (commercial C-grade) |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | — |
| RS-232 Driver Output Levels | [DATA_NEEDED: driver output voltage levels] | — |
| RS-232 Receiver Input Levels | [DATA_NEEDED: receiver input voltage thresholds] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Fonction | — | RS-232 Line Driver/Receiver (Transceiver) |
| Protocol | — | RS-232 (EIA/TIA-232E, V.28/V.24) |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V (single +5V supply) |
| Débit de données | — | 120 kb/s |
| RS-232 Driver Output Voltage | — | ±7.5 V minimum (typical ±9 V) into 3 kΩ load |
| Receiver Input Voltage Range | — | ±30 V |
| Charge Pump | — | Internal; requires 4 × 1 µF external capacitors |
| Niveau MSL | — | 1 (unlimited floor life at <30 °C / 85 % RH) |
| Lead-Free / RoHS | — | Yes (compliant per +T suffix) |
| Receiver Input Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Current (No Load) | — | [DATA_NEEDED: typical Icc] |
| Packaging | — | Tape & Reel (T+R) |