MAX3232ECDB vs MAX3232IDBR Comparaison
Comparaison détaillée côte à côte de MAX3232ECDB par Texas Instruments et MAX3232IDBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232IDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232IDBR ✓ ActifComparaison des spécifications
| Paramètre | MAX3232ECDB | MAX3232IDBR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-232 | — |
| Type | Transceiver | — |
| Number of Drivers | 2 | 2 channels |
| Number of Receivers | 2 | 2 channels |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Débit de données | 250 kbps (minimum) | — |
| ESD Protection (RS-232 Bus Pins) | ±15 kV (HBM) | — |
| ESD Protection (IEC 61000-4-2) | ±15 kV contact discharge / ±15 kV air-gap discharge | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Température de fonctionnement | 0C to +70C | — |
| Boîtier | 16-SSOP (DB, 0.209 in / 5.30 mm width) | 16-pin SSOP (DB) |
| Type de montage | Surface Mount | Surface mount |
| Packaging | Tube | — |
| External Capacitors Required | 4 x 0.1 uF (charge pump) | — |
| Lead Free Status | [DATA_NEEDED: lead free status] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| Product Type | — | Dual RS-232 line driver/receiver |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | ±15 kV |
| Plage de température de fonctionnement | — | -40°C to +85°C |
| Package Width | — | 5.30 mm |
| Package Length | — | 0.209 inch |
| Moisture Sensitivity Level | — | MSL 1 at 260°C/ unlimited floor life |
| RoHS Compliance | — | RoHS3 compliant |
| REACH Compliance | — | Not specified |
| Statut du cycle de vie | — | Active |
| Manufacturer Lead Time | — | 6 weeks |
| Automotive Qualification | — | Not specified |
| Charge-Pump Capacitors | — | [DATA_NEEDED: recommended charge-pump capacitor values] |
| Supply Bypass Capacitor | — | [DATA_NEEDED: recommended supply bypass capacitor value] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 output voltage levels] |