MAX3232EIDBR vs MAX3232ECDB Comparaison
Comparaison détaillée côte à côte de MAX3232EIDBR par Texas Instruments et MAX3232ECDB par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232EIDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3232EIDBR ✓ ActifComparaison des spécifications
| Paramètre | MAX3232EIDBR | MAX3232ECDB |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Dual RS-232 line driver and receiver | — |
| Number of Driver Channels | 2 channels | — |
| Number of Receiver Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbit/s | — |
| Driver Output Slew Rate | 30 V/µs maximum | — |
| ESD Protection | ±15 kV IEC ESD protection | — |
| RS-232 Standard | TIA/EIA-232-F | — |
| Charge Pump | Dual charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 capacitors | — |
| Boîtier | 16-pin SSOP, 5.30 mm width | 16-SSOP (DB, 0.209 in / 5.30 mm width) |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-232 |
| Type | — | Transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Débit de données | — | 250 kbps (minimum) |
| ESD Protection (RS-232 Bus Pins) | — | ±15 kV (HBM) |
| ESD Protection (IEC 61000-4-2) | — | ±15 kV contact discharge / ±15 kV air-gap discharge |
| Standard Compliance | — | TIA/EIA-232-F |
| Température de fonctionnement | — | 0C to +70C |
| Packaging | — | Tube |
| External Capacitors Required | — | 4 x 0.1 uF (charge pump) |
| Lead Free Status | — | [DATA_NEEDED: lead free status] |