MAX3232EIPWRQ1 vs MAX3232CPWRG4 Comparaison

Comparaison détaillée côte à côte de MAX3232EIPWRQ1 par Texas Instruments et MAX3232CPWRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MAX3232EIPWRQ1 MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPWRQ1 ✓ Actif

Comparaison des spécifications

Paramètre MAX3232EIPWRQ1 MAX3232CPWRG4
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Number of Drivers 2 —
Number of Receivers 2 —
Transceiver Configuration 2/2 full-duplex 2/2 (two drivers, two receivers)
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbit/s 250 kbps
Interface Standard ITU V.28 —
ESD Protection ±15 kV IEC, pin-to-pin —
Charge-Pump Supply Outputs V+ and V− —
Standby Current 300 µA typical —
Automotive Qualification AEC-Q100 qualified —
Boîtier 16-pin TSSOP 16-pin TSSOP (PW)
Package Width 4.40 mm —
Package Length 0.173 in —
Type de montage Surface mount Surface Mount
Packaging Tape and reel —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Statut RoHS [DATA_NEEDED: RoHS compliance status] Compliant (G4 suffix denotes lead-free green package)
Product Type — RS-232 line driver/receiver (transceiver) IC
Number of Line Drivers — 2
Number of Line Receivers — 2
ESD Protection (Terminal to Terminal) — +/-15 kV
Standard Compliance — TIA/EIA-232-F
Charge Pump — Dual on-chip charge-pump circuit
External Charge-Pump Capacitors — 4 (C1+, C1-, C2+, C2-)
Logic Levels (Driver Input / Receiver Output) — CMOS/TTL compatible
Supply Current (Quiescent) — [DATA_NEEDED: quiescent supply current]
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Slew Rate — [DATA_NEEDED: RS-232 driver slew rate]
Receiver Fail-Safe Biasing — [DATA_NEEDED: receiver fail-safe characteristics]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis