MAX3232IPW vs ADM230LJR Comparaison
Comparaison détaillée côte à côte de MAX3232IPW par Texas Instruments et ADM230LJR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232IPW - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232IPW ✓ ActifComparaison des spécifications
| Paramètre | MAX3232IPW | ADM230LJR |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 line driver and receiver | CMOS RS-232 driver/receiver |
| Number of Drivers | 2 channels | 1 |
| Number of Receivers | 2 channels | 1 |
| Supply Voltage Range | 3V to 5.5V | — |
| Maximum Data Rate | 250kbit/s | — |
| ESD Protection | ±15kV | — |
| Logic Input Compatibility | 5V logic | — |
| Charge-Pump External Capacitors | 0.1µF | — |
| Typical Supply Current | 300µA | — |
| RS-232 Standards | TIA/EIA-232-F and ITU V.28 | — |
| Boîtier | 16-pin TSSOP | 16-lead SOIC, 0.154 inch body width |
| Type de montage | Surface mount | Surface mount |
| Channel Configuration | 2/2 transceiver | — |
| Supply Topology | Single 3V to 5.5V supply | — |
| ESD Protection Scope | Serial-port connection terminals, including ground | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Tension d'alimentation | — | +5 V |
| Débit de données | — | 120 kB/s |
| Interface Standard | — | EIA-232-E and V.28 |
| Onboard Converter | — | DC-DC converter |
| RS-232 Output Swing | — | 9 V |
| Recommended Capacitor | — | 1 uF |
| Shutdown Function | — | Low-power shutdown |
| Receiver State in Shutdown | — | Active |
| Receiver Input Voltage Rating | — | 30 V |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |