MAX3387EEUG+ vs MAX3387EEUG+T Comparaison
Comparaison détaillée côte à côte de MAX3387EEUG+ par Analog Devices et MAX3387EEUG+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3387EEUG+ - 3V RS-232 Transceiver, 250kbps, ±15kV ESD | Maxim
MAX3387EEUG+ ✓ ActifComparaison des spécifications
| Paramètre | MAX3387EEUG+ | MAX3387EEUG+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-232 | — |
| Number of Drivers/Receivers | 3/3 | — |
| Duplex | Full | — |
| Débit de données | 250 kbps | — |
| Tension d'alimentation | 3.0 V to 5.5 V | — |
| ESD Protection (RS-232 pins) | ±15 kV (HBM); ±15 kV IEC 61000-4-2 Air Gap | — |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 24-TSSOP (4.40 mm) | 24-pin TSSOP |
| Type de montage | Surface Mount | Surface mount |
| Shutdown Current (AutoShutdown Plus) | 1 µA typical | — |
| External Capacitors | 4 × 0.1 µF | — |
| INVALID Output | Active-low, three drivers | — |
| Standards Compliance | EIA/TIA-232, V.28/V.24 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Product Type | — | 3/3 RS-232 transceiver |
| Transmitter Channels | — | 3 channels |
| Receiver Channels | — | 3 channels |
| Supply Voltage Range | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | 15 kV |
| Charge Pump | — | Dual charge pump |
| Charge Pump Capacitors | — | 4 x 0.1 uF |
| Transmitter Output Stage | — | Proprietary low-dropout design |
| Communication Standard | — | EIA/TIA-232 and V.28/V.24 |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage levels] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |