MAX338CPE+ vs MAX339CPE+ Comparaison

Comparaison détaillée côte à côte de MAX338CPE+ par Analog Devices et MAX339CPE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX338CPE+ MAX338CPE+ - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338CPE+ - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338CPE+ ✓ Actif

Comparaison des spécifications

Paramètre MAX338CPE+ MAX339CPE+
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 8:1 single-ended CMOS analog multiplexer —
Number of Channels 8 analog input channels —
Number of Circuits 1 circuit 2 circuits
On-Resistance 400 ohm per DigiKey listing; 650 ohm per chipdig listing —
Single-Supply Voltage Range 4.5 V to 30 V 4.5 V to 30 V
Dual-Supply Voltage Range ±4.5 V to ±20 V +/-4.5 V to +/-20 V
Supply Topology Single supply or dual supply —
Technology CMOS —
Signal Type Single-ended analog —
Leakage Characteristic Low-leakage —
Boîtier 16-pin PDIP 16-pin PDIP
Type de montage Through hole —
Industry-Standard Reference Pin-compatible upgrade for DG508A and DG509A —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Channel Selection Control Levels [DATA_NEEDED: address and enable control logic levels] —
Maximum Switching Voltage [DATA_NEEDED: maximum switching voltage] —
Maximum Switched Current [DATA_NEEDED: maximum switched current] —
Off-Isolation [DATA_NEEDED: off isolation] —
Charge Injection [DATA_NEEDED: charge injection] [DATA_NEEDED: charge injection]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Multiplexer Configuration — Dual 4:1
Input Channels per Circuit — 4 channels
Maximum On-Resistance — 400 ohms
Addressing — 2-bit binary addressing per 4:1 section
Switch Type — CMOS analog multiplexer
Operating Mode — Mux or demux
Maximum On-Time — 500 ns
Maximum Off-Time — 500 ns
Minimum Operating Temperature — 0 C
Maximum Operating Temperature — [DATA_NEEDED: maximum operating temperature]
Leakage Current — [DATA_NEEDED: leakage current]
Channel-to-Channel Off Isolation — [DATA_NEEDED: off isolation]
Courant d'alimentation — [DATA_NEEDED: supply current]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis