MAX338CSE+T vs MAX338CSE+ Comparaison
Comparaison détaillée côte à côte de MAX338CSE+T par Analog Devices et MAX338CSE+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX338CSE+T | MAX338CSE+ |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Multiplexer Configuration | 8:1 | — |
| Number of Circuits | 1 circuit | — |
| Number of Channels | 8 channels | 8 single-ended or 2x4 differential |
| Maximum On-Resistance | 400 ohm | — |
| Single-Supply Operating Range | +4.5 V to +30 V | — |
| Dual-Supply Operating Range | ±4.5 V to ±20 V | — |
| TTL Input Logic High | +0.8 V to +2.4 V | — |
| Process Technology | 44 V silicon-gate CMOS process | — |
| Switch Type | CMOS analog multiplexer | — |
| Signal Direction | Bidirectional conduction | — |
| Boîtier | 16-pin narrow SOIC | 16-pin Narrow SOIC (NSOIC) |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Channel Leakage Current | [DATA_NEEDED: channel leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | — |
| Off-Isolation | [DATA_NEEDED: off-isolation] | — |
| Enable Control | [DATA_NEEDED: enable control configuration] | — |
| Standard Reel Quantity | [DATA_NEEDED: standard reel quantity] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (Pb-free suffix '+') |
| Fonction | — | 8:1 analog multiplexer (or dual 4:1) |
| On-State Resistance (RON) | — | 400 ohm (max 650 ohm over signal) |
| Single Supply Voltage | — | +4.5 V to +30 V |
| Dual Supply Voltage | — | +/-4.5 V to +/-20 V |
| Logic Compatibility | — | TTL/CMOS compatible |
| Channel Leakage | — | Low-leakage CMOS, ~ nA typical |
| Switching Action | — | Break-before-make |
| Address Lines | — | 3-bit binary (A0, A1, A2) |
| Enable Input | — | Active-low EN |
| On Time (tON) | — | [DATA_NEEDED: ON switching time] |
| Off Time (tOFF) | — | [DATA_NEEDED: OFF switching time] |
| Température de fonctionnement | — | 0 C to +70 C (commercial) |
| ESD Protection | — | Yes (per datasheet) |