MAX338ESE+T vs MAX338CSE+ Comparaison

Comparaison détaillée côte à côte de MAX338ESE+T par Analog Devices et MAX338CSE+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX338ESE+T MAX338ESE+T - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338ESE+T - 8:1 CMOS Analog Multiplexer | Analog Devices

MAX338ESE+T ✓ Actif
Maxim Integrated
MAX338CSE+ MAX338CSE+ - 8-Channel CMOS Analog Multiplexer | Maxim

MAX338CSE+ - 8-Channel CMOS Analog Multiplexer | Maxim

MAX338CSE+ ✓ Actif

Comparaison des spécifications

Paramètre MAX338ESE+T MAX338CSE+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Multiplexer Configuration 8:1 —
Number of Circuits 1 circuit —
On-State Resistance 400 ohm —
Single Supply Voltage Range +4.5 V to +30 V —
Dual Supply Voltage Range ±4.5 V to ±20 V —
Address Control 3-bit binary —
TTL-Compatible Control Threshold +0.8 V to +2.4 V —
Process Technology 44 V silicon-gate CMOS —
Number of Channels 8 channels 8 single-ended or 2x4 differential
Boîtier 16-SOIC 16-pin Narrow SOIC (NSOIC)
Package Width 3.90 mm —
Delivery Format Tape and reel —
Multiplexer or Demultiplexer Operation Configurable by signal-routing arrangement —
Pin-Configurable Replacement Reference DG508A and DG509A industry-standard devices —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Channel Leakage Current [DATA_NEEDED: channel leakage current] —
Charge Injection [DATA_NEEDED: charge injection] —
Off Isolation [DATA_NEEDED: off isolation] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant (Pb-free suffix '+')
Fonction — 8:1 analog multiplexer (or dual 4:1)
On-State Resistance (RON) — 400 ohm (max 650 ohm over signal)
Single Supply Voltage — +4.5 V to +30 V
Dual Supply Voltage — +/-4.5 V to +/-20 V
Logic Compatibility — TTL/CMOS compatible
Channel Leakage — Low-leakage CMOS, ~ nA typical
Switching Action — Break-before-make
Address Lines — 3-bit binary (A0, A1, A2)
Enable Input — Active-low EN
On Time (tON) — [DATA_NEEDED: ON switching time]
Off Time (tOFF) — [DATA_NEEDED: OFF switching time]
Température de fonctionnement — 0 C to +70 C (commercial)
Type de montage — Surface Mount
ESD Protection — Yes (per datasheet)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis