MAX3483ECSA+ vs MAX3483ESA+ Comparaison
Comparaison détaillée côte à côte de MAX3483ECSA+ par Analog Devices et MAX3483ESA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3483ECSA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483ECSA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX3483ECSA+ | MAX3483ESA+ |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Tension d'alimentation | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| ESD Protection, Human Body Model | ±15 kV | — |
| ESD Protection, IEC 1000-4-2 Contact Discharge | ±8 kV | — |
| ESD Protection, IEC 1000-4-2 Air Gap Discharge | ±15 kV | — |
| Logic Compatibility | 3.3 V operation with 5 V logic interoperability | — |
| Transmitter Edge Rate | Slew-rate limited | — |
| Boîtier | 8-pin SOIC | 8-SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Verified Supply Range | — | 3 V to 3.6 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| EMI Control | — | Slew-rate limitation reduces EMI and reflections |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |