MAX3483EESA+ vs MAX3483ESA+ Comparaison

Comparaison détaillée côte à côte de MAX3483EESA+ par Analog Devices et MAX3483ESA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Actif

Comparaison des spécifications

Paramètre MAX3483EESA+ MAX3483ESA+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3.0V to 3.6V —
Nominal Supply Voltage 3.3V —
Maximum Data Rate 12Mbps 10 Mbps
ESD Protection ±15kV [DATA_NEEDED: ESD protection rating for MAX3483ESA+]
Driver Count 1 driver —
Receiver Count 1 receiver —
Supported Standards RS-422 and RS-485 —
Transceiver Configuration 1/1 half-duplex transceiver —
Driver Slew Rate Slew-rate limited —
Boîtier 8-pin SOIC 8-SOIC
Type de montage Surface mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Tension d'alimentation — 3.3 V
Verified Supply Range — 3 V to 3.6 V
Driver and Receiver Count — 1 driver and 1 receiver
Duplex Mode — Half-duplex
Interface Standards — RS-485 and RS-422
Driver Architecture — Slew-rate limited
EMI Control — Slew-rate limitation reduces EMI and reflections
Low-Speed Error-Free Transmission — Up to 250 kbps
Power Architecture — 3.3V-powered, low-power transceiver
Operating Voltage — 3 V to 3.6 V
Receiver Output Type — [DATA_NEEDED: receiver output type]
Termination Requirement — [DATA_NEEDED: termination and biasing details]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis