MAX3483ESA+ vs MAX3483EESA+T Comparaison
Comparaison détaillée côte à côte de MAX3483ESA+ par Maxim Integrated et MAX3483EESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ ActifComparaison des spécifications
| Paramètre | MAX3483ESA+ | MAX3483EESA+T |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Tension d'alimentation | 3.3 V | 3.3 V |
| Verified Supply Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Interface Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| EMI Control | Slew-rate limitation reduces EMI and reflections | — |
| Low-Speed Error-Free Transmission | Up to 250 kbps | — |
| Power Architecture | 3.3V-powered, low-power transceiver | — |
| Boîtier | 8-SOIC | 8-pin NSOIC |
| Type de montage | Surface mount | Surface mount |
| Operating Voltage | 3 V to 3.6 V | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] | ±15 kV |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Receiver Output Type | [DATA_NEEDED: receiver output type] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing details] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Tension d'alimentation de fonctionnement | — | 3 V to 3.6 V |
| Driver Type | — | Slew-rate-limited true driver |
| Supported Standards | — | RS-485 and RS-422 |
| Nombre de broches | — | 8 pins |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |