MAX3483ESA+T vs MAX3483ESA+ Comparaison

Comparaison détaillée côte à côte de MAX3483ESA+T par Analog Devices et MAX3483ESA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX3483ESA+T MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T ✓ Actif
Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Actif

Comparaison des spécifications

Paramètre MAX3483ESA+T MAX3483ESA+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Tension d'alimentation 3.3 V 3.3 V
Maximum Data Rate 10 Mbps 10 Mbps
Documented Low-Rate Operation Up to 250 kbps —
Driver Count 1 driver —
Receiver Count 1 receiver —
Communication Mode Half-duplex —
Standards Supported RS-485 and RS-422 —
Driver Type Slew-rate-limited true differential driver —
Disabled Output State High impedance —
Controls Driver Enable and Receiver Enable —
Boîtier 8-SOIC, 8 pins 8-SOIC
Type de montage Surface mount Surface mount
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
Courant d'alimentation [DATA_NEEDED: operating supply current] [DATA_NEEDED: supply current]
ESD Protection [DATA_NEEDED: ESD protection rating for exact suffix] [DATA_NEEDED: ESD protection rating for MAX3483ESA+]
Statut RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
Verified Supply Range — 3 V to 3.6 V
Driver and Receiver Count — 1 driver and 1 receiver
Duplex Mode — Half-duplex
Interface Standards — RS-485 and RS-422
Driver Architecture — Slew-rate limited
EMI Control — Slew-rate limitation reduces EMI and reflections
Low-Speed Error-Free Transmission — Up to 250 kbps
Power Architecture — 3.3V-powered, low-power transceiver
Operating Voltage — 3 V to 3.6 V
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Receiver Output Type — [DATA_NEEDED: receiver output type]
Termination Requirement — [DATA_NEEDED: termination and biasing details]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis