MAX3483ESA+ vs MAX3483EESA+T Comparaison

Comparaison détaillée côte à côte de MAX3483ESA+ par Maxim Integrated et MAX3483EESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Actif

Comparaison des spécifications

Paramètre MAX3483ESA+ MAX3483EESA+T
Marque Maxim Integrated Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Tension d'alimentation 3.3 V 3.3 V
Verified Supply Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps 12 Mbps
Driver and Receiver Count 1 driver and 1 receiver —
Duplex Mode Half-duplex Half-duplex
Interface Standards RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
EMI Control Slew-rate limitation reduces EMI and reflections —
Low-Speed Error-Free Transmission Up to 250 kbps —
Power Architecture 3.3V-powered, low-power transceiver —
Boîtier 8-SOIC 8-pin NSOIC
Type de montage Surface mount Surface mount
Operating Voltage 3 V to 3.6 V —
ESD Protection [DATA_NEEDED: ESD protection rating for MAX3483ESA+] ±15 kV
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Receiver Output Type [DATA_NEEDED: receiver output type] —
Termination Requirement [DATA_NEEDED: termination and biasing details] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Transceiver Configuration — 1 driver and 1 receiver
Tension d'alimentation de fonctionnement — 3 V to 3.6 V
Driver Type — Slew-rate-limited true driver
Supported Standards — RS-485 and RS-422
Nombre de broches — 8 pins
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
Propagation Delay — [DATA_NEEDED: propagation delay]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis