MAX3483ESA+ vs MAX3483ESA+T Comparaison

Comparaison détaillée côte à côte de MAX3483ESA+ par Maxim Integrated et MAX3483ESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Actif
Analog Devices
MAX3483ESA+T MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T - 3.3V RS-485/RS-422 Transceiver | ADI

MAX3483ESA+T ✓ Actif

Comparaison des spécifications

Paramètre MAX3483ESA+ MAX3483ESA+T
Marque Maxim Integrated Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Tension d'alimentation 3.3 V 3.3 V
Verified Supply Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps 10 Mbps
Driver and Receiver Count 1 driver and 1 receiver —
Duplex Mode Half-duplex —
Interface Standards RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
EMI Control Slew-rate limitation reduces EMI and reflections —
Low-Speed Error-Free Transmission Up to 250 kbps —
Power Architecture 3.3V-powered, low-power transceiver —
Boîtier 8-SOIC 8-SOIC, 8 pins
Type de montage Surface mount Surface mount
Operating Voltage 3 V to 3.6 V —
ESD Protection [DATA_NEEDED: ESD protection rating for MAX3483ESA+] [DATA_NEEDED: ESD protection rating for exact suffix]
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: operating supply current]
Receiver Output Type [DATA_NEEDED: receiver output type] —
Termination Requirement [DATA_NEEDED: termination and biasing details] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Documented Low-Rate Operation — Up to 250 kbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Communication Mode — Half-duplex
Standards Supported — RS-485 and RS-422
Driver Type — Slew-rate-limited true differential driver
Disabled Output State — High impedance
Controls — Driver Enable and Receiver Enable
Température de fonctionnement — [DATA_NEEDED: operating temperature range]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis