MAX3485ECSA+T vs MAX3485EESA+T Comparaison
Comparaison détaillée côte à côte de MAX3485ECSA+T par Analog Devices et MAX3485EESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ ActifComparaison des spécifications
| Paramètre | MAX3485ECSA+T | MAX3485EESA+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 half-duplex transceiver | 1/1 RS-422/RS-485 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | 3V to 3.6V |
| Maximum Data Rate | 12 Mbps | 12Mbps |
| ESD Protection (Bus Pins) | +/-15 kV | — |
| Driver / Receiver Count | 1 driver, 1 receiver | — |
| Duplex | Half-duplex | — |
| Driver Output Type | Slew-rate-limited differential | Slew-rate-limited true RS-485/RS-422 |
| Boîtier | 8-pin NSOIC (SOIC-8) | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Operating Supply Range | 3.3 V powered, single supply | — |
| Statut RoHS | RoHS3 compliant | — |
| Lead-Free Status | Lead free | unknown |
| Driver Protection | Short-circuit current limit and thermal shutdown | — |
| ESD Rating Reference | +/-15 kV ESD-protected bus pins | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | [DATA_NEEDED: receiver common-mode voltage range] |
| Unit Load / Max Nodes | [DATA_NEEDED: unit load and maximum node count] | — |
| Data Rate of Alternative MAX3485CSA+ | 10 Mbps | — |
| ESD Protection | — | ±15kV |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Supported Standards | — | RS-422 and RS-485 |
| Communication Mode | — | Half-duplex |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |
| Shutdown Function | — | [DATA_NEEDED: shutdown or low-power mode] |
| RoHS Compliance | — | ROHS3 compliant |
| REACH Compliance | — | unknown |
| Packaging Type | — | Tape and reel |
| Standard Shipping Quantity | — | [DATA_NEEDED: standard shipping quantity] |