MAX3485EPA+ vs MAX3485ECPA+ Comparaison
Comparaison détaillée côte à côte de MAX3485EPA+ par Analog Devices et MAX3485ECPA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3485ECPA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECPA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX3485EPA+ | MAX3485ECPA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 interface transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Transmission Data Rate | Up to 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-422 and RS-485 | RS-422 and RS-485 |
| Driver Protection | Short-circuit current limiting and thermal shutdown | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| Driver Slew Control | Slew-rate limited | — |
| Receiver Fail-Safe Feature | Yes | — |
| Boîtier | 8-pin PDIP | 8-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Operating Voltage | 3.3 V nominal | — |
| Power Dissipation | [DATA_NEEDED: power dissipation specification] | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Tension d'alimentation | — | 3.3 V |
| Maximum Data Rate | — | 12 Mbps |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Communication Mode | — | Half-duplex |
| Driver Architecture | — | Slew-rate-limited |
| ESD Protection Level | — | ±15 kV |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |