MAX3490EESA+T vs MAX3490CSA+ Comparaison

Comparaison détaillée côte à côte de MAX3490EESA+T par Analog Devices et MAX3490CSA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX3490EESA+T MAX3490EESA+T - 12Mbps RS-485 Transceiver | Analog Devices

MAX3490EESA+T - 12Mbps RS-485 Transceiver | Analog Devices

MAX3490EESA+T ✓ Actif
Analog Devices
MAX3490CSA+ MAX3490CSA+ - 3.3V 10Mbps RS-422/RS-485 | Analog Devices

MAX3490CSA+ - 3.3V 10Mbps RS-422/RS-485 | Analog Devices

MAX3490CSA+ ✓ Actif

Comparaison des spécifications

Paramètre MAX3490EESA+T MAX3490CSA+
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-422/RS-485 interface transceiver
Transceiver Configuration 1 transmitter and 1 receiver —
Tension d'alimentation 3.0V to 3.6V 3.3 V
Maximum Data Rate 12Mbps —
Distributor-Listed Data Rate 10Mbps —
ESD Protection ±15kV [DATA_NEEDED: ESD protection rating]
Driver Type Slew-rate-limited Slew-rate-limited true RS-485/RS-422 driver
Supported Standards True RS-485 and RS-422 RS-422 and RS-485
Température de fonctionnement -40°C to +85°C —
Boîtier 8-pin SOIC 8-pin SOIC
Type de montage Surface Mount Surface Mount
Ordering Package Tape and Reel —
Courant d'alimentation [DATA_NEEDED: Supply current] —
Driver Output Current [DATA_NEEDED: Driver output current] [DATA_NEEDED: output current]
Receiver Differential Input Range [DATA_NEEDED: Receiver differential input range] —
Common-Mode Input Range [DATA_NEEDED: Common-mode input range] —
Propagation Delay [DATA_NEEDED: Driver and receiver propagation delay] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance]
Débit de données — 10 Mbps
Driver Count — 1
Receiver Count — 1
Communication Mode — Differential
Network Capability — RS-422 point-to-point and RS-485 multipoint
Power Consumption — [DATA_NEEDED: quiescent current and supply current]
Common-Mode Range — [DATA_NEEDED: common-mode voltage range]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Termination — External network termination required for RS-485 applications
AEC-Q100 Qualification — not_applicable

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis