MAX485EESA+ vs MAX485CSA+ Comparaison
Comparaison détaillée côte à côte de MAX485EESA+ par Analog Devices et MAX485CSA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX485EESA+ | MAX485CSA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Débit de données | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | Unlimited for the MAX485 family |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: MAX485CSA operating temperature range] |
| Boîtier / Format | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Type de montage | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| Niveau MSL | 1 (Unlimited) | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Communication Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Maximum Data Rate | — | 2.5Mbps |
| Device Type | — | Low-power differential transceiver |
| Boîtier | — | 8-pin SOIC |
| Nombre de broches | — | 8 pins |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Courant d'alimentation | — | [DATA_NEEDED: unloaded and loaded supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: driver short-circuit protection duration] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |