MAX485EPA+ vs MAX485ECPA+ Comparaison
Comparaison détaillée côte à côte de MAX485EPA+ par Analog Devices et MAX485ECPA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX485EPA+ | MAX485ECPA+ |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | 1 Mbps (slew-rate-limited driver) |
| Slew Rate | Not limited | — |
| Driver Protection | Short-circuit current limited and protected | — |
| Boîtier | 8-pin PDIP | PDIP-8 (8-pin plastic DIP, through-hole) |
| Type de montage | Through-hole | Through Hole |
| Interface Standards | RS-422 and RS-485 | — |
| Driver Output | Differential | — |
| Receiver Input | Differential | — |
| Power Class | Low-power transceiver | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD rating] | +/-15 kV on driver outputs and receiver inputs |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (Maxim lead-free suffix '+') |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Transceiver Configuration | — | 1 driver / 1 receiver, half-duplex |
| Interface Standard | — | RS-485 / RS-422 differential |
| Tension d'alimentation | — | 5 V nominal (4.5 V to 5.5 V) |
| Driver Output Type | — | Differential, limited slew rate |
| Quiescent (Supply) Current | — | [DATA_NEEDED: quiescent current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: differential output voltage] |
| Driver Output Current | — | [DATA_NEEDED: output current (standard / high-impedance load)] |
| Enable Pins | — | DE (driver enable) and /RE (receiver enable, active-low), separate pins |
| Short-Circuit Protection | — | Yes, driver outputs are short-circuit current limited |
| Arrêt thermique | — | Yes, protects against excessive power dissipation |
| Quiescent Current Shutdown Pin | — | Not present on this device |
| Qualification | — | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] |