MAX485ESA+ vs DS90C402M Comparaison
Comparaison détaillée côte à côte de MAX485ESA+ par Analog Devices et DS90C402M par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX485ESA+ | DS90C402M |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tension d'alimentation | 4.75 V to 5.25 V (5 V nominal) | — |
| Débit de données | 2.5 Mbps | — |
| Supply Current (unloaded) | 120 µA to 500 µA | — |
| Receiver Hysteresis | 70 mV (typ) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold (V_TH) | -0.2 V min / +0.2 V max | — |
| ESD Protection (HBM, driver output) | ±15 kV (per datasheet) | — |
| Unit Load | 1/8 (up to 256 transceivers on bus) | — |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 8-SOIC (SOIC-8) | 8-lead SOIC |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant (per Maxim/ADI datasheet suffix '+') | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologie | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Nombre de broches | — | 8 |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |