MAX485ESA+T vs MAX485ESA+ Comparaison
Comparaison détaillée côte à côte de MAX485ESA+T par Analog Devices et MAX485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX485ESA+T | MAX485ESA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | — |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Operating Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Slew Rate Limiting | Not limited | — |
| Driver Short-Circuit Protection | Current limited and protected | — |
| Supported Standards | RS-485 and RS-422 | — |
| Boîtier | 8-pin SOIC | 8-SOIC (SOIC-8) |
| Package Pin Count | 8 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Statut RoHS | unknown | Compliant (per Maxim/ADI datasheet suffix '+') |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tension d'alimentation | — | 4.75 V to 5.25 V (5 V nominal) |
| Débit de données | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Température de fonctionnement | — | -40 °C to +85 °C |