MC33886VWR2 vs MC33886DHR2 Comparaison
Comparaison détaillée côte à côte de MC33886VWR2 par NXP Semiconductors et MC33886DHR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MC33886VWR2 | MC33886DHR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,21 | $3,13 |
| Fonction | H-Bridge Motor Driver | — |
| Configuration de sortie | Half-Bridge (H-Bridge) | Bidirectional (forward / reverse / brake) |
| Nombre de sorties | 1 | — |
| Output Current | 5 A continuous | — |
| Tension d'alimentation | 5 V to 40 V | — |
| Load Voltage | [DATA_NEEDED: load voltage absolute max] | — |
| Topologie | N-channel MOSFET H-Bridge with charge pump | Monolithic H-Bridge, 4 N-channel MOSFETs |
| Interface | CMOS / Parallel Logic | — |
| Température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Boîtier | 20-HSOP (Power SOIC with exposed pad) | 20-pin HSOP with exposed thermal pad |
| Type de montage | Surface Mount | Surface Mount |
| Applications | DC Motor Controller, H-Bridge, Solenoid Driver | — |
| On-State Resistance (RDSon) | [DATA_NEEDED: typ/max RDS(ON) mOhm] | — |
| Switching Frequency (Max) | [DATA_NEEDED: PWM max kHz] | — |
| Internal Protection | Thermal shutdown, undervoltage lockout | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant (per DigiKey listing) | Compliant |
| Lead-Free | Yes | — |
| Product Type | — | H-Bridge Motor Driver |
| Supply Voltage Range | — | 5 V to 40 V |
| Continuous Output Current | — | 5.0 A |
| PWM Frequency | — | Up to 20 kHz (typical) |
| RDS(ON) (per FET) | — | [DATA_NEEDED: typical RDS(ON) value] |
| Control Interface | — | CMOS Parallel (3 input pins: IN1, IN2, EN/PWM) |
| Charge Pump | — | Internal, no external bootstrap required |
| Résistance thermique, jonction-ambiance | — | [DATA_NEEDED: theta_JA on JEDEC 4-layer test board] |
| Protection Features | — | Thermal shutdown, short-circuit protection, undervoltage lockout |
| Load Type | — | DC motor, bi-directional solenoid, resistive/inductive loads |