MC33910BAC vs MC34910BAC Comparaison
Comparaison détaillée côte à côte de MC33910BAC par NXP Semiconductors et MC34910BAC par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MC33910BAC - LIN System Basis Chip, 5V/60mA LDO, 32-LQFP | NXP
MC33910BAC ✓ ActifNXP Semiconductors
MC34910BAC - LIN SBC, 5V/60mA LDO, High-Side Drivers | NXP | LQFP-32
MC34910BAC ✓ ActifComparaison des spécifications
| Paramètre | MC33910BAC | MC34910BAC |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Voltage Regulators | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,82 | $3,10 |
| Product Type | LIN System Basis Chip (SBC) with LDO and high-side drivers | LIN System Basis Chip (SBC) |
| Supply Voltage (VSUP) | 5.5 V to 27 V (40 V transient) | — |
| Internal LDO Output Voltage | 5.0 V | — |
| Internal LDO Output Current | 60 mA | — |
| High-Side Driver Outputs | 2 x 60 mA (selectable 50 mA / 60 mA) | — |
| LIN Protocol | LIN 2.0 / 2.1 compliant, waveshaping selectable | — |
| Internal Oscillator Frequency | 4 MHz | — |
| Supply Current (typical) | 4.5 mA | — |
| High-Voltage Wake Input | 1 input (contact monitoring / external wake-up) | — |
| ESD Protection (LIN pin, contact) | ±6.0 kV min (IEC 61000-4-2, 150 pF / 330 ohm) | — |
| Plage de température de fonctionnement | -40 C to +125 C (automotive grade) | — |
| Boîtier | 32-LQFP (7 mm x 7 mm) | 32-pin LQFP, 7 x 7 mm |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tray | — |
| Statut RoHS | Compliant (per NXP product page) | Compliant |
| Communication Interface | — | LIN 2.1 (physical layer) + SPI (digital control) |
| Integrated Voltage Regulator | — | 1x 5.0 V LDO |
| LDO Output Current | — | 60 mA |
| High-Side Drivers | — | 2x integrated high-side switches |
| Supply Voltage (VBAT) | — | 6.0 V to 27 V (automotive 12 V bus, with load-dump tolerance) |
| Température de fonctionnement | — | -40 C to +125 C (automotive grade 1) |
| ESD (LIN pin, gun contact) | — | >= +/-6.0 kV per IEC 61000-4-2 |
| Wake-Up Sources | — | LIN bus, cyclic sense, SPI command |
| Watchdog / Reset | — | Programmable window watchdog and MCU reset generator via SPI |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 grade 1 capable |