MC33912G5ACR2 vs MC34912G5ACR2 Comparaison
Comparaison détaillée côte à côte de MC33912G5ACR2 par NXP Semiconductors et MC34912G5ACR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MC34912G5ACR2 - LIN SBC PMIC, 2x 5V LDOs, DC Predriver | NXP
MC34912G5ACR2 ✓ ActifComparaison des spécifications
| Paramètre | MC33912G5ACR2 | MC34912G5ACR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Power MOSFET Drivers | Power Management |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,45 | $3,85 |
| Fonction | LIN System Basis Chip with DC Motor Pre-driver and Current Sense | System Basis Chip (SBC) with LIN transceiver, dual 5V LDOs, DC motor predriver, current sense |
| Supply Voltage Range | 5.5 V to 27 V (serial comm. 5.5 V to 18 V) | — |
| Typical Supply Current | 4.5 mA | — |
| Température de fonctionnement | -40 °C to +125 °C | -40 C to +85 C (industrial) |
| LDO Regulator 1 (V1) Output | 5.0 V, 60 mA continuous / 200 mA peak | — |
| LDO Regulator 2 (V2) Output | 5.0 V, 20 mA continuous / 200 mA peak | — |
| LIN Transceiver Standard | LIN 2.0 / 2.1 / SAE J2602 | — |
| LIN ESD (IEC 61000-4-2 contact) | ±6.0 kV minimum | — |
| Motor Pre-driver Current | Up to 1.0 A (high-side / low-side) | — |
| Current Sense Amplifier | Differential Isense H/L inputs with selectable gain | — |
| SPI Interface | 32-bit, up to 4 MHz | — |
| Boîtier | 32-LQFP (7x7 mm) | 32-pin LQFP (7 mm x 7 mm) |
| Type de montage | Surface Mount | Surface Mount (Gull Wing) |
| Packaging | Tape & Reel (TR) | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant (Pb-free) | Compliant |
| Interface / Protocol | — | SPI control + LIN 2.0/2.1/2.2 / J2602 |
| Supply Voltage (VBAT) | — | 5.5 V to 18 V (max 27 V transient) |
| On-board LDOs | — | 2 x 5.0 V regulators, up to 200 mA each |
| Motor Predriver | — | Low-side N-channel predriver with current sense (0.11 A output current capability) |
| Wake-up Inputs | — | 4 wake pins (L1-L4) + cyclic sense + forced wake |
| Operating Modes | — | Normal, Stop, Sleep, Cyclic Sense |
| Analog MUX (AMUX) | — | Selectable battery / temperature / pin voltage monitor to MCU ADC |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free/halogen-free confirmation] |
| Terminal Form | — | GULL WING (LQFP) |
| Package Code | — | LQFP-32 |