MK50DX256CLK10 vs MK24FN1M0VDC12 Comparaison

Comparaison détaillée côte à côte de MK50DX256CLK10 par NXP Semiconductors et MK24FN1M0VDC12 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MK50DX256CLK10 MK50DX256CLK10 - 100MHz 256KB Flash MCU | NXP

MK50DX256CLK10 - 100MHz 256KB Flash MCU | NXP

MK50DX256CLK10 Unknown
NXP Semiconductors
MK24FN1M0VDC12 MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP

MK24FN1M0VDC12 - 120MHz Cortex-M4 K24 MCU, 1MB Flash | NXP

MK24FN1M0VDC12 ✓ Actif

Comparaison des spécifications

Paramètre MK50DX256CLK10 MK24FN1M0VDC12
Marque NXP Semiconductors NXP Semiconductors
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Unknown Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $6,82 $9,75
Product Type 32-bit ARM Cortex-M4 microcontroller —
Processor Core ARM Cortex-M4 —
Fréquence d'horloge maximale 100 MHz 120 MHz
Flash Memory 256 KB (256K x 8) —
Architecture 32-bit RISC —
Tension d'alimentation 3.3 V 1.71 V to 3.6 V
Boîtier 80-pin LQFP (12 x 12 mm) 121-XFBGA (8x8 mm, 0.5 mm pitch)
Package Type FQFP/LQFP —
Type de montage [DATA_NEEDED: mounting type] Surface Mount
Nombre de broches 80 pins —
SRAM [DATA_NEEDED: SRAM] 256 KB
Température de fonctionnement [DATA_NEEDED: operating temperature] -40C to +105C (industrial)
ADC [DATA_NEEDED: ADC specifications] 16-bit successive-approximation, configurable single-ended or differential
DAC [DATA_NEEDED: DAC specifications] 12-bit
GPIO [DATA_NEEDED: GPIO count] [DATA_NEEDED: exact GPIO count per datasheet pinout table]
Communications Peripherals [DATA_NEEDED: communications peripheral list] —
Statut RoHS unknown Compliant
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Core — ARM Cortex-M4F (32-bit)
Program Memory (Flash) — 1 MB (1M x 8)
USB — Full-Speed USB 2.0 on-chip transceiver
Low-Power Modes — Run / Wait / Stop / VLPR / VLPS / LLS / VLLS
Display — Segment LCD driver
FPU / DSP — Single-precision IEEE-754 FPU + DSP extensions
MPU — Yes (Memory Protection Unit)
Niveau MSL — 3 (per JEDEC J-STD-020, reflow at 260C)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis