MMA7261QR2 vs MMA7260QR2 Comparaison
Comparaison détaillée côte à côte de MMA7261QR2 par NXP Semiconductors et MMA7260QR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA7260QR2 - ±1.5g-6g 3-Axis MEMS Accelerometer, QFN-16 | NXP
MMA7260QR2 ObsoleteComparaison des spécifications
| Paramètre | MMA7261QR2 | MMA7260QR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,62 | $4,10 |
| Type de capteur | 3-Axis Accelerometer (X, Y, Z) | 3-axis MEMS accelerometer (capacitive micromachined) |
| Acceleration Range | ±2.5g, ±3.3g, ±6.7g, ±10g (selectable) | ±1.5g / 2g / 4g / 6g (selectable via g-Select pins) |
| Type de sortie | Analog, ratiometric | Analog (ratiometric voltage) |
| Sensitivity (typ) | 480 mV/g (at 1.5 g, 3.3 V supply) | — |
| Tension d'alimentation | 2.2 V to 3.6 V | 2.2 V to 3.6 V |
| Supply Current (active) | 500 µA | — |
| Supply Current (sleep mode) | 3 µA | — |
| Bandwidth (X, Y) | 350 Hz | — |
| Bandwidth (Z) | 150 Hz | — |
| Filter | 1-pole low-pass, on-chip | — |
| g-Select Inputs | 2 (4 sensitivity modes) | 2 logic pins (g-Sel1, g-Sel2) |
| Boîtier | 16-QFN (6 mm × 6 mm), exposed pad | QFN-16 (6 mm x 6 mm, HQCCN) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -20 °C to +85 °C | -20C to +85C |
| Lead-Free / RoHS | Lead Free, RoHS Compliant | — |
| Sensing Axes | — | X, Y, Z |
| Courant d'alimentation | — | [DATA_NEEDED: typical active current in mA] |
| Sensitivity (1.5g) | — | 800 mV/g |
| Sensitivity (6g) | — | 200 mV/g |
| Bandwidth X / Y | — | 350 Hz |
| Bandwidth Z | — | 150 Hz |
| Zero-g Offset (typ) | — | [DATA_NEEDED: zero-g bias level] |
| Densité de bruit | — | [DATA_NEEDED: noise in mg/sqrt(Hz) or ug/sqrt(Hz)] |
| Filter Type | — | 1-pole low-pass (on-chip) |
| Sleep Mode | — | Yes (Sleep pin) |
| Statut RoHS | — | RoHS Compliant |
| Lead-Free Status | — | Lead Free |
| Moisture Sensitivity | — | MSL 2 (per Avaq comparison data) |
| Origin | — | Freescale / Motorola semiconductor IP, now NXP |